Inline lever wire connectors – bag of 100 with spec table

Inline Lever Wire Connectors – 28 to 12 AWG, 34 to 100 Pieces

100 Pieces
$64.99
Skip to product information
Inline lever wire connectors – bag of 100 with spec table

Inline Lever Wire Connectors – 28 to 12 AWG, 34 to 100 Pieces

$64.99
Pack
Estimated delivery: 6–12 days Tracking by email. Not delivered within 30 days? Replacement or full refund.
  • Free 30-day returns
  • Quality-checked before it ships
  • Support 24/7, usually replies within 30 minutes

Inline lever wire connectors splice two wires end to end in seconds: lift the orange lever, push in the stripped wire, snap it shut, and repeat on the other side. They suit extending a lamp cable, repairing low-voltage lighting or tidying a junction box. It is part of our Home Essentials collection.

Each connector is 9.1 × 39.5 × 14.7 mm in a grey PC housing. Bags of 34, 50 or 100 pieces.

Why they are quicker than tape

  • Lever clamp – open, insert and close; no tools after stripping
  • Wide wire range – 0.08 to 4.0 mm² (28 to 12 AWG)
  • Clip together – bayonet edges join connectors into a block
  • Compact – 9.1 × 39.5 × 14.7 mm per connector

Specifications

Type Inline 1-in-1-out lever connector
Housing PC plastic, grey with orange levers
Wire range 0.08 to 4.0 mm², 28 to 12 AWG
Strip length 9 to 10 mm (0.39 in)
Rating (maker's chart) 250 V, 32 A
Size 9.1 × 39.5 × 14.7 mm
Pack 34, 50 or 100 pieces in a bag

In the box

  • Inline lever wire connectors in the chosen quantity (bag)

Safety

  • Switch off the power at the breaker before any wiring.
  • Mains wiring should be done by a qualified person and to local electrical codes.

Frequently asked questions

What wire sizes fit the inline lever wire connectors?
The inline lever wire connectors take wires from 0.08 to 4.0 mm², about 28 to 12 AWG, stripped 9 to 10 mm (0.39 in).

How do the inline lever wire connectors work?
Lift the orange lever of an inline lever wire connector, push the stripped wire in and press the lever down; the two wires meet inside the housing without twisting or soldering.

Can the inline lever wire connectors be joined together?
Yes. The inline lever wire connectors have a bayonet edge, so several can be clipped side by side into one neat block.

What are the inline lever wire connectors rated for?
The maker's chart rates the inline lever wire connectors at 250 V and 32 A; the supplier lists them for 220 V household wiring.

Buying more than one, ordering again, or shopping for a gift or event? Email cs@elysianoble.com with the product link for a personal quote.

Shipping and returns – see our Shipping Policy and Refund Policy for delivery times and how returns work.

You may also like